Showing posts with label Assemblages. Show all posts
Showing posts with label Assemblages. Show all posts

Saturday, February 22, 2014

DIY New Life for Old Plates, Millinery Flowers and Junk Jewelry

I wanted to share  a little project I love to do when I have some spare time away from making jewelry to create FUNctional assemblage pieces. I have collected shabby old vintage and antique plates for many years now. I wrote about it in 2012 for Stampington, along with a mirror plate project that was a bit more simple. I love this little plate mirror project because it incorporates many things that I love to collect~ mirrors, vintage jewelry, old plates and vintage millinery. I love the results I got with this recent project. I think the key is not to over think your design...just go with it! You can always go back and add or subtract as you see fit. When I first started this project, I did not tape the mirror in place on the plate and it slid to one side and cured that way. I decided to fill the bottom in with flowers and broken bits of vintage jewelry. This one has a shabby old vintage watch in the mix, as well as flowers and velvet leaves from old hats, vintage pins with missing rhinestones and backs, and bits of tatted lace.

Basic materials you need for this project:
broken jewelry parts (Ebay, Etsy)
old (or new) millinery flowers (Estate sales, Etsy, Thrift Stores)
round, beveled mirror that fits into the center of your plate (I got mine at Michael's)
old plate (check thrift stores, garage sales, estate sales)
E-6000 and/or hot glue gun (Michael's, Walmart, Etsy)
popsicle stick
blue painter's tape (hardware store, grocery store)

close up of assemblage mirror plate embellishment
large chipped vintage Wedgwood dinner plate, embellished with flowers and old jewelry
Spread the glue onto the back of the mirror with the popsicle stick and place on plate. Tape edges down with the painters tape until cured (about 8 hours).
Tape should peel right off, leaving no residue.
Use hot glue to adhere the millinery flowers to the plate. Since they are not weighty, they shouldn't come off easily.
Use the E-6000 to adhere the jewelry parts, using the painter's tape to keep pieces from sliding around if necessary. Let cure for 12 hours before hanging with a plate hanger.

 If this inspires you, Don't forget to pin this to your craft board on Pinterest! (and please credit me as well!)
If you would like to purchase these one of a kind pieces, visit my Etsy Shop.
www.SacredCake.Etsy.com

Wednesday, May 29, 2013

My Winged Heart Art


This is where is all began for me...the first pieces of artwork I ever made involved hearts with paper and wire wings, and sometimes messily sewn fabric ones, back in 1999. The wire elements were inspired by one of my favorite artists, Brian Andreas.  I was fortunate enough to be featured in the wonderful book, Taking Flight, which featured an article with a mirrored piece I did with the same signature paper and wire wings. Cloth Paper Scissors featured an article about me and my work (the first time i was ever published in a magazine!), and I just found an image of my work on their Pinterest board! So nice to see those again...they have long since been given away or sold...but seeing my assemblage work inspires me to want do this again. Assemblage jewelry and art is my heartbeat made tangible. Broken pieces made whole and beautiful again....that is me. It refreshes my spirit to read these old interviews...my heart is still the same kind of heart. I still want the same things from life. I still want to make a difference in the world, even in the smallest ways. Perhaps the smallest ways are best.

photo by Jennifer Valentine,  "Writing in Books"click to visit link
Did I ever tell you how much I love old pencils? I think about the history they hold. Writings I'll never see...signatures, tests, apology letters...I love that about old things. They have stories to tell if we are just quiet enough to listen. This piece required me to very carefully drill holes through the tops of  about 15 old pencils! The wings were actually those cheap puffy fabric wings that I painted with a paint that you can rust.

Below is a heart from years ago (my mother's heart) that was featured on KellyRaeRoberts.Com. It was for an interview and It is made with old garter straps and stained up fabric from an old ironing board (I think i still have some of that.). Oh, how I love old raggedy fabric!
image by Kelly Rae Roberts, click for article

I used the same kind of silver thread for my hearts for years until the last bit left the spool...and I have not been able to find the same thread since. Would you like to learn to make the paper and wire wings? I was thinking about a little tutorial. It isn't as hard as it might seem. I have a little suitcase FULL of old, yellowed tissue paper that I have found stuffed inside old hats at garage sales and various places. This has really got me going now...i feel some more heart art coming on!

Here are a couple more paper and wire winged pieces featured years ago on Lovely Liz Lamoreux's blog back in 2009, when she did an interview with me (SO honored.)!

"Leaving" by Jennifer Valentine
"Flying Irony" by Jennifer Valentine




Monday, November 28, 2011

An Antique Assemblage Tutorial, a Trash to Treasure Stor

We are doing a bit of restoration on our 100 year old home, which unfortunately, entails crumbling plaster here and there.
So, this little tutorial was born out of  lovely finds that appeared among the crumbled plaster in the bottom of the livingroom wall...true story! Imagine our amazement, pulling little bits of history from the dusty mess. We found a well worn antique corsage, an antique boy's collar, and an antique child's shoe and wooden thread spools. I didn't take photographs of each find as it came to us, but I did get a shot of the antique child's shoe that looks to be from the late 1800's. It looked pretty sad. Full of sand and dusty mess~
concealed shoe before
concealed shoe after being cleaned and stuffed
I imagine the life this little concealed shoe had. Handed down from child to child to child.  Repaired over and over and over again with patches and tiny nails, until one day, lost to time. Only to be rediscovered over 100 years later, in a very unlikely place! So, being the sentimental and quirky peeps that we are (my husband and I), we wanted to preserve the find somehow, in a creative way~
SO, here is what you need for the tutorial:

an old shoe
some tissue paper for stuffing the shoe
a small chunk of floral foam
some stiff wire
this and that
some old stuff
maybe some moss if you'd like
your imagination
an old photgraph (I'll send you one if you'd like!)(I have lots.)

Directions in a "nutshell"~
First, clean your old shoe as well as you'd like it to be. We wanted ours to keep the shabby chic look, so i just brushed it off well and applied a bit of vaseline to clean the leather a bit.
Then stuff your shoe to the desired plumpness up to the bottom of the heel. Cut a chunk of floral foam, and carve it a bit to fit inside the top of the shoe so it is kinda snug.
After putting in the floral foam, apply wire to your objects by hot gluing them on, or wrapping it around. I used a piece of wire bent in the shape of a "U" to add a chunk of old lace.~

I added some additional old looking velvet violets to the corsage we found in the wall, took a long piece of wire and wrapped one end around the bunch. Trim it a little and stick it down into the floral foam and adjust to taste.
To add the photograph, I curved  a piece of stiff wire into a long "U" shape and hot glued it to the back of a cabinet card (an antique photograph on stiff cardboard.) The "U" shape gives the photograph two prongs to put into the foam so it has more support. I then covered the wire with a piece of paper so it would look better from the back.~
My husband wanted to somehow incorporate the antique little boy's collar, so i added a dab of hot glue under the back fold of the collar and added it to the end of another piece of wire...then into the floral foam.
the "foof"
Then I added a few more violets here and there,  and bits of floral moss peeking out from the buttons of the shoe, and here and there along the edges. I made a "foof" (my made up word) of shabby chic-ish dark green silk organza. It adds dimension and a bit more shape and fill to the arrangement. To make a "foof" of your own, gather some organza or lace in a pleasing bunch, then twist the wire tightly around one end. Fluff it to desired foofiness and stick into the arrangement to give it a bit of fullness.~



and here is the finished product~
Antique Shoe Arrangement
I hope this maybe inspires you! You too can make something from an old shoe and a bunch of old junk.
See you again soon with some fun vintage photo booth photo printables for collages and such. You will want to see these!
Blessings and Light to You and Yours,
jennifer

Tuesday, November 15, 2011

Smitten...and Busy!

I became a grandma this week! Little Benjamin was born on November 12, and weighed in at 8 pounds and 3 ounces! He's a quiet and observant little fella...chubby-wubby cheeks...and I am completely smitten with him...and busy with holiday orders (for which I am so incredibly grateful) and helping Em with the baby. I just wanted to share a couple of photographs with you here. I am still recovering from almost living with Em in the hospital for an entire week. She got very sick before she was due to deliver, with sepsis from a nasty kidney infection. To be honest, I thought for a moment that I would loose her. IV antibiotics for an entire week to manage it. I have never been in a constant state of prayer like that before...ever.

Benjamin David
exhausted new grandma and baby Benjamin
I was given the honor of being present during the delivery, and the incredible grace to calmly see my daughter through a very difficult labor and delivery. Her quiet strength astounded me, and renewed my belief in my own inner strength.
I am so looking forward to watching the changing dynamics of our family...seeing the interactions...watching my husband relish being a new grandpa, and having a new baby to hold and talk to...
there is just no limit to the amount of love a heart can hold.

I wanted to share this little idea and photograph sent to me by my dear mama today. She is so creative and crafty!
Simple ingredients:
glass ornament, old rusty spring, chandelier crystal and pillar candle holder! Turn ornament upside-down, attach the crystal, set inside the spring and into the pillar candle holder and....voilĂ ! How nifty is that? I'm thinkin' maybe I'll try it with an old plate instead of a candle holder, and an old Christmas ball instead of the heavy glass ball, I'm thinking with lighter ingredients there might need to be a bit of glue involved.
whatdya think? Feel free to share this idea with friends!
cobalt blue assemblage by my mom



Wednesday, October 26, 2011

Functional Vintage Assemblage Art Tutorial to Share

I've been busy making some of my favorite things for the online shop....using everyday kinds of objects and elevating them to little functional assemblage art pieces. I get the inspiration from the curls of wire that I use, from one of my favorite artists, Brian Andreas.


étincelle


This is a bit time consuming, but fairly straightforward.

Here are the things you will need:

vintage salt shakers
sturdy wire, 20 gauge steel is best (check your local hardware store)
two part epoxy resin
small paper cups
wooden or plastic sticks for stirring
vintage pins or earrings
metal file or Dremel tool with sanding bit
wire cutters
paper for protecting your surface 
paper towels
safety glasses
painters tape (blue)
e-6000 glue

Directions:
First, clean and dry your shakers. Set them on the protective paper on a sturdy, flat surface. Keep the lids off, but set them next to the matching shaker. Put on your safety glasses.
Cut lengths of the wire about 2 1/2" feet long. Curl one end around your finger a bit to shape it and stick the wire down into the shaker bottom. Do this for each one you want to make. To keep from poking your eyes, curl the top tips a bit to round them out.
If you want two curls coming from the top, like mine, use two strands of wire, or make a "V" shape and stick it down in there.
Next, mix about 1/4 of a cup of the resin in the paper cup, stirring with the stick until completely blended. No need to measure perfectly to make 1/4C. Just be sure to add equal amounts of resin into the cup. It usually comes in squeeze bottles, so hold the bottles over your cup in each hand and squeeze them together in unison and it will be right enough for this project! (because no one will see it if it gets bubbly and imperfect.)(It's ok)(Really. It is.)(It will get hard enough to work fine.)(Trust yourself.)
OK, this part is where you have to work quickly. After you have mixed your resin, squeeze your cup a bit to make a pour spout shape at the top that will fit into the top of the shaker. Small enough to pour the resin into the shaker. This can ba a bit tricky if you have a shaker with a narrow top opening! Especially if you already have wire sticking out of the opening. The trick though, is to cover the bottom of the shaker AND the wire in it, so that it will be sturdy when the resin hardens around it.
If you get resin on the shaker, just wipe it off with a paper towel as soon as possible.
Now, slide the shaker top on to the wires, threading it through the holes you want them to go through. Twist on the cap.


 
Curl the wire, beginning with a small curl, then work your way outward to form a spiral. Now to decorate, be sure to put on your safety glasses, and remove the backs from the pins and earrings with your wire cutters. File the backs down roughly with your file or Dremel tool. Hold them up to the shakers to see where you'd like them to be placed. File that spot on the shaker a bit to roughen it up. Lay it down and put a dot of glue on the roughened area of your pin or earring or whathaveyou. Wait about 30 seconds, then place your vintage element on the roughened spot on the shaker. Use a piece of painters tape over it to hold it in place and set overnight, or wait several hours for the glue to semi-set before adding more pieces on top of that one. The tape peels right off when you're finished.
Whew! We're done!
Please feel free to contact me with any questions. I'm very approachable! Ask me anything. Just leave a comment here with your email address so I can answer. Anonymous is just fine. No hoop jumping allowed here. No letters to decipher and punch in to leave a comment.
milk glass shakers with vintage earrings!
an example of an oil can holder I made
If you don't think you want to fuss with all of those directions, then you can  purchase some of these pieces from my etsy shop! I can also do custom orders for weddings. These would make great place holders or displays for any shabby chic wedding. Speaking of weddings, here is a recent shabby bridal comb I've got in the shop right now.

Delight

oil cans featured in Somerset Life 2010
I hope you have fun with this project and it sparks your creativity!
Blessings and Light to You All,
Jennifer Valentine of Sacred Cake

Friday, November 26, 2010

Unique Display Idea, Cat Eye Glasses and Antique Letters

I bought several ancient, (as in late 1800's) blue shutters from an antique shop quite some time ago for 5 bucks a piece...they still have the original hardware on them and they are all this amazing pale blue color. I didn't have to do a thing to them but clean them up a little. This one, I use for a display piece in my living room...on which, I hang a vintage lingerie/pants hanger with amazing red clips that really add a little punch to the display.....and on said lingerie/pants hanger I have clipped a beloved antique green satin purse in which I display some of our favorite antique letters, postcards, and a pair of our favorite vintage cat eye glasses. More glasses from our collection are just inserted in the slats.




This is by far, my most favorite display. I hope it inspires you to be more playful in your home too.
Let me know what you're favorites are and maybe I can do a post about it? I'd love to see!

Sunday, July 11, 2010

Tears for the Bookbinder's Son, an antique assemblage


It has been quite some time since I've created an assemblage. I have been focusing my energies on creating "functional" artwork and jewelry. I think this is actually the first though, that I have had a specific feeling behind the creating of it...I guess maybe more an emotion...or quite simply; grief.
This piece is about my father, as a way of expressing some of the emotions I've experienced since his death. Looking through old journal pages the other day, I came across pages from a time many years ago, in which I struggled with debilitating depression. I often had days in which I simply needed to list "what was good"...as if seeing it in writing made it somehow more real. It helped to keep more focused on what was important and what was, in fact good. Going over my list, I came upon an entry that stole my breath and made me choke on the sobs that wanted to escape from my throat. Just one line in my short list that day, of what was good:
"Hearing my father's laughter."
I have good days that string together one to another to another, when I think the worst of it is over....and then there are those days when my heart feels as if a heavy stone is tied tightly to it and the tears leak from behind my eyes no matter how I try to stay out of the shadows of grief and focus on the light.





p.s.(I took these shots without a tripod, by the way, thus creating the not so crisp pictures...I have since ordered a little tripod.)